ICS NEW PRODUCTS CATALOGUE

ISSUE 21

SETTING THE STANDARD IN ACCESS CONTROL

ELECTRIC LOCKING

300ZLDC-EXTP Z & L Extension

• Extends 300ZLDC from 68mm to 127mm • Fully adjustable • Aluminium

Armature

L Bracket

Extension plate allows the Z Bracket to extend from a maximum of 68mm to a maximum of 127mm

Frame

Magnet

Z Bracket

Door

Maximum extension 127mm

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

300ZL-EXT Z & L Extension

• Extends 300ZL from 72mm to 140mm • Fully adjustable • Aluminium

Armature

L Bracket

Extension plate allows the Z Bracket to extend from a maximum of 72mm to a maximum of 140mm

Frame

Magnet

Z Bracket

Door

Maximum extension 140mm

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

500ZLDC-EXTP Z & L Extension

• Extends 500ZLDC from 82mm to 143mm • Fully adjustable • Aluminium

Armature

L Bracket

Extension plate allows the Z Bracket to extend from a maximum of 82mm to a maximum of 143mm

Frame

Magnet

Z Bracket

Door

Maximum extension 143mm

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

500ZL-EXT Z & L Extension

• Extends 500ZL from 87mm to 147mm • Fully adjustable • Aluminium

Armature

L Bracket

Extension plate allows the Z Bracket to extend from a maximum of 87mm to a maximum of 147mm

Frame

Magnet

Z Bracket

Door

Maximum extension 147mm

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

CK-100 Electric Cabinet Lock

• Operating voltage 12~28VAC/DC • Polyamide Casing • Fail-Secure • 220lbs holding force • Monitored

STAINLESS STEEL

Lock Bolt Sensor Switch Output: SPDT Relay Rating: 1A/125VAC WIRING DETAILS

22

12~28VDC/AC RED RED Yellow = N/C Bond Sensor Contact Output

60

7

20

(When door locked) Green = Common Blue = N/O Door Status Contact (When door locked)

60

60

SPECIFICATION Voltage: 12~28VDC/AC Current Draw:

Holding 69mA@12VDC 69mA@24VDC Pull in @ 165mA@12VDC 165mA@24VDC

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

G600M-BCE Monitored Mini Stainless Steel Magnet

• Rear Cable Entry • Operating Voltage 12Vdc • Stainless Steel • Holding force up to 600lbs (272kg) • Weather resistant: IP65 • Vandal resistant • Monitored

WEATHER RESISTANT IP65

VANDAL RESISTANT

STAINLESS STEEL

40

43.5

203

12

WATERPROOF PROPERTIES This series of waterproof magnetic locks are sealed with an epoxy potting compound (E87252 (S), UL94V-0) and is protected by this compound. They are proved to withstand a water resistance as established in test procedures of IP 65.

185

38

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

GK450M-ST Series Fire Rated ANSI Strike

UK FIRE TESTED BS EN1634:1 FD30 & FD60 DOORS

• Non Handed Fully Reversible • 1500lbs (680kg Holding Force) • Brushed Stainless Steel • Fire Rated to FD30 & FD60 (UK tested) • Fail Safe/Fail Secure Reversible • Monitored

Fail-safe or fail-secure is field reversible by reversing the round screw. CHANGING FAIL-SAFE / FAIL-SECURE

1 3/16” (29.5mm)

Fail-safe when '1' facing up.

Fail-secure when '2' facing up.

4 ⁷/8” (123.8mm)

4 1/8” (105mm)

1 3/4” (45mm)

3 3/8” (85mm)

LIP EXTENSIONS (OPTION)

25mm

50mm

11/16” (17mm)

1/8” (3mm) 1 ¼” (31.75mm)

1 11/16” (43.5mm)

LP-050 2" (50mm)

LP-025 1" (25mm)

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

GK450-ST Series Fire Rated ANSI Strike • Non Handed Fully Reversible • 1500lbs (680kg Holding Force) • Brushed Stainless Steel • Fire Rated to FD30 & FD60 (UK tested) • Fail Safe/Fail Secure Reversible

UK FIRE TESTED BS EN1634:1 FD30 & FD60 DOORS

Fail-safe or fail-secure is field reversible by reversing the round screw. CHANGING FAIL-SAFE / FAIL-SECURE

1 3/16” (29.5mm)

Fail-safe when '1' facing up.

Fail-secure when '2' facing up.

4 ⁷/8” (123.8mm)

4 1/8” (105mm)

1 3/4” (45mm)

3 3/8” (85mm)

LIP EXTENSIONS (OPTION)

25mm

50mm

11/16” (17mm)

1/8” (3mm) 1 ¼” (31.75mm)

1 11/16” (43.5mm)

LP-050 2" (50mm)

LP-025 1" (25mm)

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

GK460 Series Fire Rated ANSI Strike

• Non Handed Fully Reversible • 1500lbs (680kg Holding Force) • Brushed Stainless Steel • Fail Safe/Fail Secure Reversible

Special ramp design for quick and easy installation.

1 1/16” (27mm)

1 3/8” (35mm)

4 ⁷/8” (123.8mm)

3 3/8” (85mm)

1 7/16” (36mm)

Fail-safe or fail-secure is field reversible by reversing the round screw. CHANGING FAIL-SAFE / FAIL-SECURE

1 ¼” (31.75mm)

Fail-secure when '2' facing up.

Fail-safe when '1' facing up.

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

MK360 Monitored Electric Lock

• Monitored • Operating voltage 12Vdc (24Vdc available to order) • Stainless Steel • Fail Safe • 1500lbs holding force • 500lbs side-load SPECIFICATION • Voltage tolerance ± 10% • Current draw: 250mA at 12Vdc, 150mA at 24Vdc (at temperature 20°C). • Operating temperature: -10~45°C (14 to 120°F)

• Bolt Sensor Monitoring • Door Status Monitoring

STAINLESS STEEL

500LBS SIDELOAD

45mm

30.5mm

45mm

30.5mm

Operating Voltage

+ _

+ _

Power Supply

N.O.2

BOND SENSOR SWITCH N.C.: Unlocked N.O.: Locked 1A/125Vac (Lock status output: 1A/125Vac)

Lock Bolt Sensor Output

C.2

N.C.2 N.O.1 C.1 N.C.1

200mm

200mm

DOOR STATUS SWITCH N.C.: Unlocked N.O.: Locked

Door Status Output

1A/125Vac (Door status output: 1A/125Vac)

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

SDGi Sliding Adjustable L Brackets

• Anodised Aluminium • Allows infinite adjustment and positioning backwards, forwards and angled • Very easy to fit and drastically reduces the installation time. • Simple to adjust magnet position - even after commissiong • No fixings required into the underside of the transom • Incorporates a cavity and cut out to make cabling easier and more secure • Comes completely assembled • Anti-tilt ORDER CODES SDGi-M For Slimline Magnetic Locks SDGi-S For Standard Magnetic Locks

EXTERNAL ELEVATION

INTERNAL ELEVATION

GUIDE CHANNEL FIXING SCREW SLIDE PLATE FIXING SCREW

MAIN BODY

MAIN BODY

SLIDE PLATE

SLIDE PLATE

SLIDE NUT

GUIDE CHANNEL

GUIDE CHANNEL

MAGNET

MAGNET

BOLTS & SPENCERS SUPPLIEDWITH MAGNET

INSTALLATION DIAGRAM

MAIN BRACKET BODY

4 NO SCREWS TO SECURE BODY TO TRANSOM

POWER CABLE

ARMATURE

SLIDER PLATE WITH MAGNET ATTACHED

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

ELECTRIC LOCKING

SL165A Soleniod Bolt

• Operating Voltage 12Vdc • Die-Cast Metal • Fail-Safe • Adjustable Timer • Monitored

SPECIFICATION • Voltage: 12Vdc • Current draw: 570mA at 12Vdc • Monitoring: N/C Contact • Adjustable Timer: 0~3 seconds • Operational Door Gap: 6mm Max • Bolt: 14mm throw, 12.7mm Diameter

VERTICAL

114mm

39mm

HORIZONTAL

114mm

27mm

20mm

27mm

1mm

114mm

ATTENTION Maximum distance as 6mm. It is unable to lock

if the spacing is exceeding 6mm.

20mm

ELECTRIC LOCKING

All dimensions in mm | Setting the Standard in Access Control

AUDIO AND VIDEO ENTRY

AMALOCK - SV1 Smart Video Entry

The Amalock SV1 is designed to communicate directly to your mobile devices using wireless Wi-Fi. • Easy to install with our easy to understand Installation Guide. • Whenever the button is pressed on the Outdoor Station, your mobile device and Monitors is sent a notification to enable you to remotely unlock.

7” SCREEN

FEATURES INCLUDE: • Stylish slim 7”Monitor • Touch Screen • 2 Way Communication • Motion Alert • Mobile Device Unlock • Indoor Monitor Unlock • Zoom in

MONITOR

• Record File Playback • 16G SD Card included • Fob access • 2 Relay Outputs • Expandable - 2 Panels - 6 Monitors - 2 CCTV Cameras OPTIONS • Add Extra Monitor (AMALOCK- MON7 ) • Add Call Panel (AMALOCK- P1 )

WIDTH 184 MONITOR

HEIGHT 126

DEPTH 22

CALL PANEL

WIDTH 47

HEIGHT 131

DEPTH 22

KEYRING FOB (x5)

CALL PANEL

ANGLED BRACKET

Download our user guide for technical spec and wiring instructions.

Dimensions in mm.

OPTIONS AMALOCK - MON7

AMALOCK - P1

POWERED BY:

AUDIO AND VIDEO ENTRY

All dimensions in mm | Setting the Standard in Access Control

AUDIO AND VIDEO ENTRY

AMALOCK - SV2 Smart Video Entry

The Amalock SV2 is designed to communicate directly to your mobile devices using wireless Wi-Fi. • Easy to install with our easy to understand Installation Guide. • Whenever the button is pressed on the Outdoor Station, your mobile device and Monitors is sent a notification to enable you to remotely unlock.

7” SCREEN

FEATURES INCLUDE: • Stylish slim 7”Monitor • Touch Screen • 2 Way Communication • Motion Alert • Mobile Device Unlock • Indoor Monitor Unlock • Zoom in

MONITOR

• Record File Playback • 16G SD Card included • Fob access • 2 Relay Outputs • Expandable - 2 Panels - 6 Monitors - 2 CCTV Cameras OPTIONS • Add Extra Monitor (AMALOCK- MON7 ) • Add Call Panel (AMALOCK- P2 )

WIDTH 184 MONITOR

HEIGHT 126

DEPTH 22

CALL PANEL

WIDTH 91

HEIGHT 142

DEPTH 22

KEYRING FOB (x5)

CALL PANEL

Download our user guide for technical spec and wiring instructions.

Dimensions in mm.

OPTIONS AMALOCK - MON7

AMALOCK - P2

POWERED BY:

AUDIO AND VIDEO ENTRY

All dimensions in mm | Setting the Standard in Access Control

AUDIO AND VIDEO ENTRY

AMALOCK - SV3 Smart Video Entry

The Amalock SV3 is designed to communicate directly to your mobile devices using wireless Wi-Fi. • Easy to install with our easy to understand Installation Guide. • Whenever the button is pressed on the Outdoor Station, your mobile device and Monitors is sent a notification to enable you to remotely unlock. FEATURES INCLUDE: • Stylish slim 10”Monitor • Touch Screen • 2 Way Communication • Motion Alert

10” SCREEN

• Mobile Device Unlock • Indoor Monitor Unlock • Zoom in

MONITOR

• Record File Playback • 16G SD Card included • Fob access • 2 Relay Outputs • Expandable - 2 Panels - 6 Monitors - 2 CCTV Cameras OPTIONS • Add Extra Monitor (AMALOCK- MON10 ) • Add Call Panel (AMALOCK- P1 )

WIDTH 249 MONITOR

HEIGHT 182

DEPTH 22

CALL PANEL

KEYRING FOB (x5)

CALL PANEL

ANGLED BRACKET

WIDTH 47

HEIGHT 131

DEPTH 22

Download our user guide for technical spec and wiring instructions.

Dimensions in mm.

OPTIONS AMALOCK - MON10

AMALOCK - P1

POWERED BY:

AUDIO AND VIDEO ENTRY

All dimensions in mm | Setting the Standard in Access Control

AUDIO AND VIDEO ENTRY

AMALOCK - SV4 Smart Video Entry

The Amalock SV4 is designed to communicate directly to your mobile devices using wireless Wi-Fi. • Easy to install with our easy to understand Installation Guide. • Whenever the button is pressed on the Outdoor Station, your mobile device and Monitors is sent a notification to enable you to remotely unlock. FEATURES INCLUDE: • Stylish slim 10”Monitor • Touch Screen • 2 Way Communication • Motion Alert

10” SCREEN

• Mobile Device Unlock • Indoor Monitor Unlock • Zoom in

MONITOR

• Record File Playback • 16G SD Card included • Fob access • 2 Relay Outputs • Expandable - 2 Panels - 6 Monitors - 2 CCTV Cameras OPTIONS • Add Extra Monitor (AMALOCK- MON10 ) • Add Call Panel (AMALOCK- P2 )

WIDTH 249 MONITOR

HEIGHT 182

DEPTH 22

CALL PANEL

KEYRING FOB (x5)

CALL PANEL

WIDTH 91

HEIGHT 142

DEPTH 22

Download our user guide for technical spec and wiring instructions.

Dimensions in mm.

OPTIONS AMALOCK - MON10

AMALOCK - P2

POWERED BY:

AUDIO AND VIDEO ENTRY

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB044S Budget Green Dome Button

• Brushed Stainless Steel Plate • ABS Plastic Housing • Metal Green Dome Button

• Surface mount • COM-N/O - N/C • Supplied with security screws SPECIFICATION • Button Structure: Metal • Relay: N/O - COM - N/C changeover • Rating: 3A@ 36VDC • Testing: To 500,000 cycles • Fixing: Security screws • Plate: Brushed Stainless Steel • Housing: ABS Plastic • Operating temperature: -10C ~ 55C (14F ~ 131F)

50mm

91mm

40mm

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB044S-ITW-PTE Exit Button • Brushed Stainless Steel Plate • Green dome button • Surface mount • ABS Plastic Housing • COM-N/O - N/C • Supplied with security screws SPECIFICATION • Max. Rating: 5A/125/250 Vac. • Contact resistance: 50mΩ Max. (Initial).

• Operating travel: 2.7mm. • Operating life (Mechanical): Over 100,000 times. • Cables included.

50mm

M22 X P1.5

2

35

29.9

91mm

5

23

0.6 Thickness

40mm

45

Operating Travel 2.7

FREE POSITION

OPERATING POSITION

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB054S Budget Green Dome Button

• Brushed Stainless Steel Plate • ABS Plastic Housing • Metal Green Dome Button

• Surface mount • COM-N/O - N/C • Supplied with security screws SPECIFICATION • Button Structure: Metal • Relay: N/O - COM - N/C changeover • Rating: 3A@ 36VDC • Testing: To 500,000 cycles • Fixing: Security screws • Plate: Brushed Stainless Steel • Housing: ABS Plastic • Operating temperature: -10C ~ 55C (14F ~ 131F)

50mm

91mm

40mm

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB054S-ITW-PTE Exit Button • Brushed Stainless Steel Plate • Green dome button • Surface mount • ABS Plastic Housing • COM-N/O - N/C • Supplied with security screws SPECIFICATION • Max. Rating: 5A/125/250 Vac. • Contact resistance: 50mΩ Max. (Initial).

• Operating travel: 2.7mm. • Operating life (Mechanical): Over 100,000 times. • Cables included.

50mm

M22 X P1.5

2

35

29.9

91mm

5

23

0.6 Thickness

40mm

45

Operating Travel 2.7

FREE POSITION

OPERATING POSITION

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB064S-ITW-PTE Exit Button

• Brushed Stainless Steel Plate • Green dome button • Surface mount • ABS Plastic Housing • COM-N/O - N/C • Supplied with security screws SPECIFICATION • Button Structure: Metal • Relay: N/O - COM - N/C changeover • Rating: 3A@ 36VDC • Testing: To 500,000 cycles • Fixing: Security screws • Plate: Brushed Stainless Steel • Housing: ABS Plastic • Operating temperature: -10C ~ 55C (14F ~ 131F)

50mm

M22 X P1.5

2

35

29.9

91mm

5

23

0.6 Thickness

40mm

45

Operating Travel 2.7

FREE POSITION

OPERATING POSITION

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB064S Budget Green Dome Button

• Brushed Stainless Steel Plate • ABS Plastic Housing • Metal Green Dome Button

• Surface mount • COM-N/O - N/C • Supplied with security screws SPECIFICATION • Button Structure: Metal • Relay: N/O - COM - N/C changeover • Rating: 3A@ 36VDC • Testing: To 500,000 cycles • Fixing: Security screws • Plate: Brushed Stainless Steel • Housing: ABS Plastic • Operating temperature: -10C ~ 55C (14F ~ 131F)

50mm

91mm

40mm

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

External Vandal Switch

• Brushed Stainless Steel • Surface Mount • COM / NO / NC Change-over-contacts • Heavy Duty • Security Screws Provided

Green Dome

WIDTH 90

HEIGHT 130

DEPTH 100

Dimensions in mm.

100mm

M22 X P1.5

2

35

29.9

130mm

5

23

0.6 Thickness

45

Operating Travel 2.7

FREE POSITION

OPERATING POSITION

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

External Vandal Switch

• Brushed Stainless Steel • Surface Mount • COM / NO / NC Change-over-contacts • Heavy Duty • Security Screws Provided

Green Dome

WIDTH 90

HEIGHT 130

DEPTH 100

Dimensions in mm.

100mm

M22 X P1.5

2

35

29.9

130mm

5

23

0.6 Thickness

45

Operating Travel 2.7

M19 X P1

22 14.9

18

20

2

3

33

FREE POSITION

OPERATING POSITION

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB300 Special Exit Button

• Brushed Stainless Steel • 19mm Stainless Steel button • Flush mount

• COM / NO COM / NC Change-over-contacts SPECIFICATION • Max. Rating: 5A/125/250 Vac. • Contact resistance: 50mΩ Max. (Initial).

• Operating travel: 2.7mm. • Operating life (Mechanical): Over 100,000 times. • Operating life (Mechanical): Cables included.

OPTIONS DRB-SH

85

85

19

22

M19 X 1

2

35

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB-450-WP Exit Button

• ABS Plastic • 50mm raised button • Surface mount • COM-N/O COM-N/C Weather resistant: IP65

10.5

85

M22 X P1.5

2

85

50

24.5

5

23

0.6 Thickness

40

45

You can touch the push button on any part of the face to create the contact action.

Operating Travel 2.7

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB-IR-1224 Flush IR Button • Brushed Stainless Steel Plate • IR Button • Flush mount • COM-N/O - N/C • 12~24VDC Operation

39,1

M22

7x AWG 28 x L200

025

0

13,5

2,50

32,50

SETTINGS

INT/EXT MODE

Adjuster for detecting distance

Adjuster for Time Delay

Adjuster for Time Delay

Adjuster for detecting distance

INT MODE

EXT MODE

0.5-20 Seconds 5-20 cm Toggle function: In the end of Clockwise position Starting Point: from ‘metal point’

INT: Factory setting, with Jumper open LEDs will be controlled by IR button

EXT: with Jumper closed LEDs will be controlled by system

CABLES

Red cable: 12-24VDC Black cable: 0VDC

Green: N.O Blue: COM Purple: N.C

Change-over Contact

Yellow: Green LED controlled in EXT White: Red LED controlled in EXT mode

PIN

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB-IR-1224-SBB-BLK Flush IR Button

• Brushed Stainless Steel Plate • IR Button

• Surface mount • COM-N/O - N/C

• 12~24VDC Operation • ABS Plastic Housing

39,1

M22

7x AWG 28 x L200

025

50mm

0

13,5

2,50

32,50

91mm

40mm

SETTINGS

INT/EXT MODE

Adjuster for detecting distance

Adjuster for Time Delay

Adjuster for Time Delay

Adjuster for detecting distance

INT MODE

EXT MODE

0.5-20 Seconds 5-20 cm Toggle function: In the end of Clockwise position Starting Point: from ‘metal point’

INT: Factory setting, with Jumper open LEDs will be controlled by IR button

EXT: with Jumper closed LEDs will be controlled by system

CABLES

Red cable: 12-24VDC Black cable: 0VDC

Green: N.O Blue: COM Purple: N.C

Change-over Contact

Yellow: Green LED controlled in EXT White: Red LED controlled in EXT mode

PIN

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB-IR-1224-SBB-GRN Flush IR Button

• Brushed Stainless Steel Plate • IR Button

• Surface mount • COM-N/O - N/C

• 12~24VDC Operation • ABS Plastic Housing

39,1

M22

7x AWG 28 x L200

025

50mm

0

13,5

2,50

32,50

91mm

40mm

SETTINGS

INT/EXT MODE

Adjuster for detecting distance

Adjuster for Time Delay

Adjuster for Time Delay

Adjuster for detecting distance

INT MODE

EXT MODE

0.5-20 Seconds 5-20 cm Toggle function: In the end of Clockwise position Starting Point: from ‘metal point’

INT: Factory setting, with Jumper open LEDs will be controlled by IR button

EXT: with Jumper closed LEDs will be controlled by system

CABLES

Red cable: 12-24VDC Black cable: 0VDC

Green: N.O Blue: COM Purple: N.C

Change-over Contact

Yellow: Green LED controlled in EXT White: Red LED controlled in EXT mode

PIN

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB-IR-1224-SBB-SLV Flush IR Button

• Brushed Stainless Steel Plate • IR Button

• Surface mount • COM-N/O - N/C

• 12~24VDC Operation • ABS Plastic Housing

39,1

M22

7x AWG 28 x L200

025

50mm

0

13,5

2,50

32,50

91mm

40mm

SETTINGS

INT/EXT MODE

Adjuster for detecting distance

Adjuster for Time Delay

Adjuster for Time Delay

Adjuster for detecting distance

INT MODE

EXT MODE

0.5-20 Seconds 5-20 cm Toggle function: In the end of Clockwise position Starting Point: from ‘metal point’

INT: Factory setting, with Jumper open LEDs will be controlled by IR button

EXT: with Jumper closed LEDs will be controlled by system

CABLES

Red cable: 12-24VDC Black cable: 0VDC

Green: N.O Blue: COM Purple: N.C

Change-over Contact

Yellow: Green LED controlled in EXT White: Red LED controlled in EXT mode

PIN

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB-IR-1224-WP Exit Button

• Infra Red Button • ABS Plastic • Legend: Door Release • Surface mount • 12~24VDC Operation • Weather resistant: IP65 • COM-N/O - N/C

WEATHER RESISTANT IP65

85

39,1

M22

7x AWG 28 x L200

025

85

0

13,5

2,50

32,50

40

Adjuster for detecting distance

Adjuster for Time Delay

Red cable: 12-24VDC Black cable: 0VDC

Green: N.O Blue: COM Purple: N.C

Change-over Contact

Adjuster for Time Delay

Adjuster for detecting distance

Yellow: Green LED controlled in EXT White: Red LED controlled in EXT mode

0.5-20 Seconds 5-20 cm Toggle function: In the end of Clockwise position Starting Point: from ‘metal point’

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB-IR-I016 Flush IR Button

• Brushed Stainless Steel Plate • IR Button

• Surface mount • COM-N/O - N/C • 12~24VDC Operation

There was no copy on the sheet. Please confirm copy required

39,1

M22

7x AWG 28 x L200

025

0

13,5

2,50

32,50

SETTINGS

INT/EXT MODE

Adjuster for detecting distance

Adjuster for Time Delay

Adjuster for Time Delay

Adjuster for detecting distance

INT MODE

EXT MODE

0.5-20 Seconds 5-20 cm Toggle function: In the end of Clockwise position Starting Point: from ‘metal point’

INT: Factory setting, with Jumper open LEDs will be controlled by IR button

EXT: with Jumper closed LEDs will be controlled by system

CABLES

Red cable: 12-24VDC Black cable: 0VDC

Green: N.O Blue: COM Purple: N.C

Change-over Contact

Yellow: Green LED controlled in EXT White: Red LED controlled in EXT mode

PIN

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB-IR-K4 Infrared Touchless Exit Button SPECIFICATIONS: • Surface Installation Material: Plastic • Contact Rating: 3A, AC 120V/DC 30V • Input Voltage: 12~24VDC 12~28VAC • Output Contact: NO / NC / COM • Standby: Red LED on, visitors • Item Type: Exit Button • Function: Infrared No Touch • Size: 86x86x20mm • Material: ABS Fireproof Plastic

• Contact: NO,NC,COM • Trigger: Green LED on

86mm

20mm

86mm

CONTACT

TIME DELAY

SENSITIVE DISTANCE

Green

NO NC

White

Turn left short

Turn left short

Yellow Black Red

COM GND

Turn right long

Turn right long

1

3362

3

1

3362

3

DC12/24V

VR1

VR2

A permanent supply is required to operate the

The EXIT Button is default with Time delay. Adjustable range 0.3-30s.

The EXIT Button is default with sensitive distance. Adjustable range 5-20cm.

touchless series EXIT BUTTON, and provide all its functions as below.

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

DRB-IR-N Flush IR Button

• Brushed Stainless Steel Plate • IR Button

• Surface mount • COM-N/O - N/C • 12~24VDC Operation

39,1

M22

7x AWG 28 x L200

025

0

13,5

2,50

32,50

SETTINGS

INT/EXT MODE

Adjuster for detecting distance

Adjuster for Time Delay

Adjuster for Time Delay

Adjuster for detecting distance

INT MODE

EXT MODE

0.5-20 Seconds 5-20 cm Toggle function: In the end of Clockwise position Starting Point: from ‘metal point’

INT: Factory setting, with Jumper open LEDs will be controlled by IR button

EXT: with Jumper closed LEDs will be controlled by system

CABLES

Red cable: 12-24VDC Black cable: 0VDC

Green: N.O Blue: COM Purple: N.C

Change-over Contact

Yellow: Green LED controlled in EXT White: Red LED controlled in EXT mode

PIN

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

KS-001-BLK Key Switch

• Brushed Stainless Steel • Flush Mount • Single Pole • Action-Maintained • Keyed alike

• Key release in both positions • FREE: Add your company logo • COM / NO / NC Change-over-contacts

WIDTH 91

HEIGHT 91

DEPTH 50

Dimensions in mm.

50mm

91mm

40mm

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

KS-001-GRN Key Switch

• Brushed Stainless Steel • Flush Mount • Single Pole • Action-Maintained • Keyed alike

• Key release in both positions • FREE: Add your company logo • COM / NO / NC Change-over-contacts

WIDTH 91

HEIGHT 91

DEPTH 50

Dimensions in mm.

50mm

91mm

40mm

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

KS-002-BLK Key Switch

• Brushed Stainless Steel • Flush Mount • Single Pole • Action-Momentary • Keyed alike • Key release in one position • FREE: Add your company logo • COM / NO / NC Change-over-contacts

WIDTH 91

HEIGHT 91

DEPTH 50

Dimensions in mm.

50mm

91mm

40mm

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

KS-002-GRN Key Switch • Brushed Stainless Steel • Flush Mount • Single Pole • Action-Momentary • Keyed alike • Key release in one position • FREE: Add your company logo • COM / NO / NC Change-over-contacts

WIDTH 91

HEIGHT 91

DEPTH 50

Dimensions in mm.

50mm

91mm

40mm

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

Key Switch

• Brushed Stainless Steel • Flush Mount • Single Pole • Action-Maintained • 3 Position • FREE: Add your company logo • COM / NO / NC Change-over-contacts

WIDTH 91

HEIGHT 91

DEPTH 50

Dimensions in mm.

50mm

91mm

40mm

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

SBB Series Surface Housing

• Surface mount • ABS plastic housing • Supplied with security screws • Available in Silver, Green or Black housing

ORDER CODE: SBB-SLV (SILVER)

ORDER CODE: SBB-GRN (GREEN)

ORDER CODE: SBB-BLK (BLACK)

50mm

91mm

40mm

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

EXIT DEVICES

SP-2 Call Point Protector

• Supplied with Red + Green covers • Polycarbonate construction • Surface mount • Can retro fit over existing device • Red and green covers supplied • Built-in 96db sounder • Supplied with Break Seal Specification • Protective cover helps prevent malicious or accidental false fire alarms • Break seal option for added security • Available with or without a 96dB integral sounder powered by a 3V lithium battery

Surface mounting

Flush mounting

Standby current: 15µA Volume Low: 87dB@1m, 8mA High: 94dB@1m, 20mA Battery Primary Lithium Battery 3v, 1500mAH

SMART DEVICES

All dimensions in mm | Setting the Standard in Access Control

ADDITIONAL EQUIPMENT

FAMOD1224 Fire Alarm Interface Module

• Voltage: DC12V • Size: 55x40.2x19.1mm • Current: 30mA • Operating temp: -20~+70°C • Negative Trigger

SPECIFICATION

-VE +VE

DC 12V

0 +VE +R -R NC NO

NO

Voltage Free NO/COM Contacts On Fire Panel

NC

NC Key Switch

COM

NO

ADDITIONAL EQUIPMENT

All dimensions in mm | Setting the Standard in Access Control

ADDITIONAL EQUIPMENT

SMB-D003 Versatile Relay with Timer

• Power input 12~24Vdc • 5Amp@250Vac / 30Vdc Relay rating • 2 x relay outputs • Changeover relay contacts • + or - trigger • Time adjustment from 0.5 ~ 60 seconds

RELAY MODULE

RELAY MODULE

N.C1

N.C1

From power supply

From power supply

+

+

COM1

COM1

12V (24V)

12V (24V)

-

-

N.01 N.C2

N.01 N.C2

COM2

COM2

TRIG

TRIG

N.02

N.02

With timer (J5-ON)

Without timer (J5-OFF)

TIMER OFF ON

DELAY TIME SETTING R17

LIGHT D1

D4

R17

R19

D1

R1 J5

DELAY SETTINGS JUMPER J5

R12

U3

R10 R11

OFF TIMER ON

R5

J6

R4

24V 12V

R18

R8

U2

C5

VOLTAGE JUMPER J4

R9

C3

Q2

K1

J4

C2

R7

C4

SMR-D003

D3

2017-12-12

D2

12V 24V

J1

J3

J2

+

-

TRIG

N.O COM N.C

N.O COM N.C

POWER AND CONTROL PORT Power+ Power- TRIG

RELAY OUTPUT 1

RELAY OUTPUT 2

ADDITIONAL EQUIPMENT

All dimensions in mm | Setting the Standard in Access Control

ADDITIONAL EQUIPMENT

FB8W 8Way Fuse Board

• Voltage: 12~24VDC • Current: 0.5A x 8 • Size: 100x62x18 • Operating temp: -20~+70°C

SPECIFICATION

100mm

+

DC 12V~24V

-

62mm

LOAD 1

LOAD 2

LOAD 3

LOAD 4

LOAD 5

LOAD 6

LOAD 7

LOAD 8

ADDITIONAL EQUIPMENT

All dimensions in mm | Setting the Standard in Access Control

ADDITIONAL EQUIPMENT

PS3A-24-DR Smallbox Power Supply

SWITCH

• 220Vac power input • 24Vdc 3Amp output • Metal hinged box • Deep discharge protection • LED Indicators • Key lockable • 4 outputs • Triggered Inputs • Designed for door hold open magnets

WIDTH 225

HEIGHT 195

DEPTH 80

Dimensions in mm.

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

ADDITIONAL EQUIPMENT

PS12V-AC-3A Smallbox Power Supply

SWITCH

• 220Vac power input • 12Vdc 3Amp output • Clam Shell box

WIDTH 195

HEIGHT 225

DEPTH 80

Dimensions in mm.

EXIT DEVICES

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

DG-365-PLUS Proximity Access

• Operating voltage 12Vdc • Die-cast Metal • Bluetooth • Weather resistant: IP65 • Vandal resistant • Multiple LED display with audible indication

WEATHER RESISTANT IP65

VANDAL RESISTANT

BLUETOOTH

OPTIONS

STD-PC

STD-PCPS

KT-10BC

KT-15EM

KT-16

621-11

3” (76mm)

Red (+)

Power Supply Item Wire Colour Terminal

Description

12VDC

Black (-)

1

Red

+

Positive

Yellow (N.C.)

2

Black

-

Negative

Diode

Electric Lock 1 Fail- Secure

White (COM)

3

Blue

N.O.

LED Indicator

(Must install Diode)

4

White

COM

SSR Contact

Blue (N.O.)

Diode

4 3/4” (120mm)

Electric Lock 2 Fail- Secure

5

Yellow N.C.

Green (P.B.)

6

(Must install Diode)

Green

PB

RTE Contact

Green (P.B.) Orange (DS)

7

Green

PB

RTE (Dry contacts)

8

Orange

DS

Logo Indicator

Door Sensor (REED)

Door Sensor (REED)

Brown (ALARM) Brown (ALARM) Orange (DS)

9

Orange

DS

10

Brown

ALM Tamper Alarm Output Contact

Tamper Alarm Output (Dry contacts)

11

Brown

ALM

13/16” (21mm)

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

DG-850-TH-G Standalone Keypad Access

• Operating voltage 12Vdc • Die-cast Metal • Allows up to 20+1 PIN codes • Touch Panel keypad • Dual relays output for multi-control • Weather resistant • 4 or 5 Digit Codes • 3 LED displays with audible indication

WEATHER RESISTANT IP65

VANDAL RESISTANT

SPECIFICATION • Current draw: Average 70mA, Peak 90mA@12VDC. • Input: 1 x Request-to-exit, time out reed switch contact • Output: Dual relays, N.O./N.C/Com. Output (volt free contact). • Relays Rating: 2A MAX@30VDC., 0.4A@120VAC. • Fully programmable via keypad and master code.

+

Power Supply

INPUT 12~24VDC N.O.1 COM. 1 N.C.1

Electric Lock 1 Fail-Safe Mode

(Must install a Varistor)

+

PB PB

Dry Contact

+ +

Power Supply

• Factory master code: 12345 -1234. • Memory Volume: 20+1 PIN codes. Relay 1 is controlled by *01~*20 user slots. Relay 2 is controlled by *21 user slots.

N.O.2 COM.2

N.C.2 REED REED

Electric Lock 2 Fail-Safe Mode

• Invalid PIN Lock-out: The system will shut down for 60 seconds while 30 codes of incorrectly Master Codes enrolled or Pin codes attempted ( None beeper signal of keypad activations).

(Must install a Diode)

4 or 5 Reset

N.C Contact Output: Open Status N.O. Contact Output: Closed Status

2 15/16” (76mm)

13/16” (21mm)

For AC/DC

For DC use only

The door strike or relay must have a Varistor or a Diode across the door strike terminals to suppress the back EMF of the strike-failure to do so will damage the relay contacts and electronic components, or even burns the controller.

4 3/4” (120mm)

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

DG-850-TH-S Standalone Keypad Access

• Operating voltage 12Vdc • Die-cast Metal • Allows up to 20+1 PIN codes • Touch Panel keypad • Dual relays output for multi-control • Weather resistant • 4 or 5 Digit Codes • 3 LED displays with audible indication

WEATHER RESISTANT IP65

VANDAL RESISTANT

SPECIFICATION • Current draw: Average 70mA, Peak 90mA@12VDC. • Input: 1 x Request-to-exit, time out reed switch contact • Output: Dual relays, N.O./N.C/Com. Output (volt free contact). • Relays Rating: 2A MAX@30VDC., 0.4A@120VAC. • Fully programmable via keypad and master code.

+

Power Supply

INPUT 12~24VDC N.O.1 COM. 1 N.C.1

Electric Lock 1 Fail-Safe Mode

(Must install a Varistor)

+

PB PB

Dry Contact

+ +

Power Supply

• Factory master code: 12345 -1234. • Memory Volume: 20+1 PIN codes. Relay 1 is controlled by *01~*20 user slots. Relay 2 is controlled by *21 user slots.

N.O.2 COM.2

N.C.2 REED REED

Electric Lock 2 Fail-Safe Mode

• Invalid PIN Lock-out: The system will shut down for 60 seconds while 30 codes of incorrectly Master Codes enrolled or Pin codes attempted ( None beeper signal of keypad activations).

(Must install a Diode)

4 or 5 Reset

N.C Contact Output: Open Status N.O. Contact Output: Closed Status

2 15/16” (76mm)

13/16” (21mm)

For AC/DC

For DC use only

The door strike or relay must have a Varistor or a Diode across the door strike terminals to suppress the back EMF of the strike-failure to do so will damage the relay contacts and electronic components, or even burns the controller.

4 3/4” (120mm)

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

UNITS 1-2, JBJ BUSINESS PARK, NORTHAMPTON ROAD, BLISWORTH, NORTHAMPTONSHIRE NN7 3DW T: +44 (0)1604 879300 | E: orderline@icssecurity.co.uk | W: icssecurity.co.uk