ACCESS CONTROL_Part1

A C C E S S C O N T R O L

ACCESS CONTROL

ACCESS CONTROL

DG-101WI DG-101BA Standalone Keypad Access

WHITE

BLACK

• Operating voltage 12~24Vdc • ABS plastic • Allows up to 49+50 PIN codes • Dual relays output for multi control • Fully programmable via keypad and master code • 5 digit codes only • 3 LED displays with audible indication

40

70

12Vdc

+

+

Locking Device 1 (Fail-Safe)

Com.1

N.O.1

N.C.1

Relay

Relay

12Vdc

+

2 3 1

Locking Device 2 (Fail-Secure)

114

+

5 6 4

Push Button 1

Black: N.O.2 Brown: Com.2 Red: N.C.2 Orange: P1 Yellow: B1 Green: P2 Blue: B2 Purple: Reed Grey: Reed

8 9 7

Reset

Master Code reset to Factory 12345

0 #

Push Button 2

1 2 3

Contact door reed switch. This reed switch is used to reset the re-locking time to 0 second when the door is moved (relay 1). Using N.O. contact in case of door closed, change over to N.C. when door is moved.

SPECIFICATION • Current draw: Pull in: 60mA/12Vdc; Holding: 15mA/12Vdc. • Output: Dual relays, N.O./N.C/Com. • Relays rating: 2A@30Vdc., 0.4A@120Vac.

• Memory volume: 49+50 PIN codes. Relay 1 is controlled by 001~049 user slots. Relay 2 is controlled by 050~099 user slots.

All dimensions in mm

Setting the Standard in Access Control

1

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

DG-15LD Standalone Keypad Access • Operating voltage 12~24Vdc • Die-cast Aluminium • Allows up to 20+1 PIN codes • Backlit keypad • Dual relays output for multi-control • Weather resistant • Vandal resistant • 3 LED displays with audible indication

WEATHER RESISTANT

VANDAL RESISTANT

SPECIFICATION • Current draw: Average 15mA, Peak 100mA@12Vdc. • Input: 2 x Request-to-exit, time out reed switch contact. • Output: Dual relays, N.O./N.C/Com. Output (volt free contact) . • Relays Rating: 2A MAX@30Vdc., 0.4A@120Vac. • Fully programmable via keypad and master code. • Factory master code: 12345.

• Memory Volume: 20+1 PIN codes. Relay 1 is controlled by *01~*20 user slots. Relay 2 is controlled by *21 user slots.

• Invalid PIN Lock-out: The system will shut down for 60 seconds while 30 codes of incorrectly Master Codes enrolled or Pin codes attempted (None beeper signal of keypad activations) .

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

2

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

DG-25LD Standalone Keypad Access • Operating voltage 12~24Vdc • Stainless Steel • Allows up to 49+50 PIN codes • Backlight keypad • Dual relays output for multi-control • Weather resistant • Vandal resistant • 3 LED displays with audible indication

WEATHER RESISTANT

STAINLESS STEEL

VANDAL RESISTANT

80

26

Locking Device 2 (Fail-Safe)

+

Power Supply

+

+

Locking Device 1 (Fail-Secure)

+

2 3 1

Power Supply

+

N.O.1 COM N.C.1 REED REED

Contact door reed switch. This reed switch is used to reset the re-locking time to 0 second when the door is moved. (Using N.O. contact in case of door closed, change over to N.C. when door is moved).

N.O.2 COM N.C.2

5 6 4 8 9 7 0 #

P2 B2

P1 B1

Push Button 2

116

Push Button 1

1 2 3

Master Code reset to Factory 12345

P1

SPECIFICATION • Current draw: Average 15mA, Peak 60mA@12Vdc. • Input: 2 x Request-to-Exit, time out reed switch contact. • Output: Dual relays, N.O./N.C/Com. Output (free voltage contact) . • Relays Rating: 2A MAX@30Vdc., 0.4A@120Vac. • Fully programmable via keypad and master code. • PIN codes: 5 digit codes only.

• Memory Volume: 49+50 PIN codes. Relay 1 is controlled by 001~049 user slots. Relay 2 is controlled by 050~099 user slots. • Relays Activation Time: (*100,*200) . Strike Time: 1~99 seconds. Strike mode: Access Timer or Latch.

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

3

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

EPX-20 -WP Combined Proximity and Keypad Access • Operating voltage 12Vdc • ABS plastic • 1000 users • Illuminated • Touch sensitive • Pin / Prox / Pin & Prox • Aux weigand output • LED display

• Weatherproof

For AC/DC

RED

+ 12V

74

BLACK

GND

~ ~

+

BROWN

DATA1

+

ORANGE

DATA0

For DC use only

GREY

Button

PINK

LED

2 3 1

BLUE

Normal Close

114

PURPLE

5 6 4

COM

GREEN

NO-Normal

EPX20 Keypad Access

8 9 7

YELLOW

Bell

8 ohm 0.5W

WHITE

GND

0 #

+ 12V PINK

LED YELLOW BELL PURPLE COM

RED

17

BLACK

GND WHITE

GND BROWN DATA1

BLUE NORMAL

GREEN

N.O.

ORANGE DATA0

GREY BUTTON

SPECIFICATION • Current draw: Pull in: 100mA/12Vdc; Holding: 70mA/12Vdc. Pull in: 50mA/24Vdc; Holding: 35mA/24Vdc. • Input: Request-to-Exit, time out reed switch contact. • Output: Dual relays, N.O./N.C/Com. • Relays rating: 2A MAX@30Vdc., 0.6A@120Vac.

• Programmable 4 digit code. • RF frequency: EM 125 KHz. • Relay strike time: 01~99 seconds or toggle mode (00) . • Read range: 5cm. (In noise -free environment) .

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

4

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

KP-500 Combined Proximity and Keypad Access

• Operating voltage 12Vdc • Die-cast metal • Allows up to 1000+1 proximity cards, tokens and PIN’s

• Backlit keypad • 2 LED displays

WEATHER RESISTANT − IP 65 −

VANDAL RESISTANT

27

Power Supply

+

76

AUX RELAY

Com N.C N.O

Com N.C N.O

Change from NC to NO for use with FAIL SECURE LOCK

+

2 3 1 5 6 4 8 9 7 0 #

+12V

GND

PUSH/NO

OPENSW

DOOR1 BELL

BELL

AUX IN GND

+12V

GND

DATA0

DATA1

120

+

12 Vdc Power Supply

Reed Switch

Exit Button

Open SW - GND: Exit button connection (Button must be N/O going closed). Aux IN - GND: A N/O going closed input that activates the aux relay and sounds an internal alarm when connection made. Door1 - GND: Reed switch connections must be N/C when the door is closed. If the door is left open an internal alarm will sound when the door sensor mode is enabled. The time can be adjusted using the alarm delay time settings.

Bell-Bell:

A N/O connection going closed when the bell button is pressed.

SPECIFICATION • Output: 1 relay COM/NO/NC. • Programmable 4 digit code. • RF Frequency EM 125 KHz.

• Relay strike time 01~99 seconds. • Read range 5cm. (In noise -free environment) .

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

5

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL ACCESS CONTROL

DG 800 -N Combined Proximity and Keypad Access DG 800 -N-BLK Combined Proximity and Keypad Access DG 800N Combined Proximity and Keypad Access • Operating voltage 12~24Vac/Vdc • Die-cast Aluminium • 1000+10 Proximity cards, tokens and PIN’s • Backlit keypad • Weather resistant: IP65 • Vandal resistant • Terminal connections • Operating voltage 12~24Vac/Vdc • Die-cast Aluminium • 1000+10 Proximity cards, tokens and PIN’s • Backlit keypad • Weather resistant: IP65 • Vandal resistant • 2 LED displays with audible indication • Operating voltage 12~24Vac/Vdc • Die-cast Aluminium • 1000+10 Proximity cards, tokens and PIN’s • White Backlit keypad • W aterproof: IP 66 • Vandal resistant • 2 LED displays with audible indication

Waterproof WEATHER RESISTANT − IP 65 − − IP 6 6 −

VANDAL RESISTANT VANDAL RESISTANT

WEATHER RESISTANT − IP 65 −

VANDAL RESISTANT

OPTIONS

STD-PC

STD-PCPS

KT-10BC

KT-15EM

KT-16

621-11

For AC/DC

21

12/24Vdc

Red

+ −

76

~ ~

12/24Vdc

Black

+

REED

Brown

For AC/DC For AC/DC

21

21

+

+ −

12VDC Power Supply +

+ −

+

PB1

Grey

12VDC Power Supply

For DC use only

76

PB2

Orange

76

~ ~

~ ~

+

+

N.C.1

+

N.C.1

N/O1

Green

2 3 1 5 6 4 8 9 7 0 #

Electric Lock 1 (Fail-Safe)

Electric Lock 1 (Fail-Safe)

+

COM 1

COM 1

Varistor

COM1

Purple

Varistor

N.O.1

For DC use only For DC use only

N.O.1

N/C1

Blue

(MUST install a Varistor)

120

(MUST install a Varistor)

PB1

Exit Button 1

PB1

Exit Button 1

N/O2 Stand Alone Reader

Green/White

2 3 1 5 6 4 8 9 7 0 #

2 3 1 5 6 4 8 9 7 0 #

PB2

Exit Button 2

PB2

Exit Button 2

COM2

Purple/White

REED

Door Closed=N.O. Door Opened=N.C.

REED

REED

Door Closed=N.O. Door Opened=N.C.

REED

+

N/C2

Blue/White

+

120

N.C.2

120

N.C.2

Electric Lock 2 (Fail-Secure)

▲

Diode

Electric Lock 2 (Fail-Secure)

COM 2 Stand Alone Reader Stand Alone Reader COM 2

▲

Diode

+

(MUST install a Diode)

PURPLE/ WHITE

RED

GREY

PB1

PURPLE COM1

COM.2

N.O.2

+

(MUST install a Diode)

N.O.2

12VDC Power Supply +

-

BLUE/ WHITE

ORANGE PB2

BLUE

N/C1

N.C.2

BLACK

GND

12VDC Power Supply

GND

GREEN/ WHITE

BROWN REED

GREEN N/O1

N/O2

+

RED

PINK COM. 1

YELLOW PB2

PURPLE COM.2

+

-

BLACK RED

PINK COM. 1

YELLOW PB2

PURPLE COM.2

WHITE

N.O.1

BROWN REED

BLUE

N.O.2

-

LIGHT GREEN

ORANGE PB1 WHITE

N.O.1

BROWN REED

BLUE

N.O.2

BLACK

N.C.1

GREY

N.C.2

GREEN GND

Setting the Standard in Access Control

43

LIGHT GREEN

N.C.1

ORANGE PB1

GREY

N.C.2

GREEN GND

2933_ICS_Catalogue_Update_2018.indd 43

07/01/2019 14:44

ACCESS CONTROL Setting the Standard in Access Control 6

All dimensions in mm

All dimensions in mm | Setting the Standard in Access Control ACCESS CONTROL

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

ACCESS CONTROL

DG 800 -N-BLK Combined Proximity and Keypad Access

• Operating voltage 12~24Vac/Vdc • Die-cast Aluminium • 1000+10 Proximity cards, tokens and PIN’s • White Backlit keypad • W aterproof: IP 66 • Vandal resistant • 2 LED displays with audible indication

VANDAL RESISTANT

Waterproof

− IP 6 6 −

For AC/DC

21

+ −

+

12VDC Power Supply

76

~ ~

+

+

N.C.1

Electric Lock 1 (Fail-Safe)

+

COM 1

Varistor

N.O.1

For DC use only

(MUST install a Varistor)

PB1

Exit Button 1

2 3 1 5 6 4 8 9 7 0 #

PB2

Exit Button 2

REED

Door Closed=N.O. Door Opened=N.C.

REED

+

120

N.C.2

Electric Lock 2 (Fail-Secure)

▲

Diode

COM 2 Stand Alone Reader

(MUST install a Diode)

N.O.2

+

12VDC Power Supply

GND

+

RED

PINK COM. 1

YELLOW PB2

PURPLE COM.2

-

WHITE

N.O.1

BROWN REED

BLUE

N.O.2

BLACK

LIGHT GREEN

N.C.1

ORANGE PB1

GREY

N.C.2

GREEN GND

7

ACCESS CONTROL

All dimensions in mm

Setting the Standard in Access Control All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL ACCESS CONTROL

DG160 N-BLK Combined Proximity and Keypad Access

• Operating voltage 12Vdc • Aluminium • Allows up to 1000+10 proximity cards, tokens and PIN’s • Blue Backlit keypad • Built in anti-tamper switch • 2 LED displays

WATERPROOF

VANDAL RESISTANT

− IP 6 6 −

24

For AC/DC

44

+ −

+

12VDC Power Supply

~ ~

+

+

N.C.1

2 3 4 5 6 7 8 9 0 1 #

Electric Lock 1 (Fail-Safe)

+

COM 1

Varistor

For DC use only

N.O.1

(MUST install a Varistor)

PB1

Exit Button 1

PB2

Exit Button 2

152

REED

Door Closed=N.O. Door Opened=N.C.

REED

+

N.C.2

Electric Lock 2 (Fail-Secure)

▲

Diode

COM 2 Stand Alone Reader

(MUST install a Diode)

N.O.2

+

12VDC Power Supply

GND

+

RED

PINK COM. 1 YELLOW PB2

PURPLE COM.2

-

WHITE

N.O.1

BROWN REED BLUE

N.O.2

BLACK

LIGHT GREEN N.C.1 ORANGE PB1

GREY

N.C.2

GREEN GND

All dimensions in mm

ACCESS CONTROL Setting the Standard in Access Control

ACCESS CONTROL

8

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

KTP 12 Series Piezoelectric System Keypads • Operating voltage 5 or 12Vdc • Heavy duty • Single gang or mullion mount • Industry standard outputs available • No moving parts to wear out • Laser marked keypad graphics • Weather resistant: IP65 • Vandal resistant • Limited lifetime warranty

Essex Electronics

WEATHER RESISTANT − IP 65 −

VANDAL RESISTANT

ORDERING GUIDE

A CHOOSE OUTPUT

B INDICATE MATRIX

EXAMPLES

10 16 17 19 22 32 40

26 Bit Wiegand

3

12 Pad 3x4

A OUTPUT

C FINISH/STYLE

8 Bit Word ABA Track II

C CHOOSE VOLTAGE

Infrared/Bar Code

KTP 10 3 SN

BCD

B MATRIX

(X-Y or 2 of 7 only)

X-Y Row and Column

5

5 Volt

2 of 7 485 RS-485 98

12

12 Volt

Serial ASCII 1000 HID Corporate 1000

A OUTPUT

C VOLTAGE

D CHOOSE FINISH/STYLE XX No Bezel SN Stainless Steel Bezel KN Black Bezel BN Brass Finished Bezel

KTP 32 3 12 SN

CUSTOM OUTPUTS AVAILABLE

B MATRIX

D FINISH/STYLE

26 Bit Wiegand: Field Programmable Site Code (000-255). Serial ASCII: Field Selectable Baud Rate (up to 19.2kps) Parity Option (None, Odd or Even). RS-485: Field Selectable Baud Rate (up to 115.2kps) Parity Option, Polling or Event Mode).

Actual bezel is Stainless Steel with long lasting Brass appearance PVD coating.

SPECIFICATION • Voltage tolerance: ±15%.

• Input voltage: 5 or 12V field selectable (Except X-Y and 2 or 7 outputs) . • Keypad switch lifcycle: >1 Billion Cycles. • Operating temperature: -40 ~ 70°C (-40 to 160°F) .

• Lock’s surface temperature: Current temperature ±20% (when power is on

• Standby current draw: <20mA Non illuminated, <60mA illuminated (at temperature 20°C) .

• Humidity: 100% relative. • Weight: 454g (approx) .

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

9

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL ACCESS CONTROL

DG160 N Combined Proximity and Keypad Access

• Operating voltage 12Vdc • Aluminium • Allows up to 1000+10 proximity cards, tokens and PIN’s • Backlit keypad • Built in anti-tamper switch • 2 LED displays

WEATHER RESISTANT − IP 65 −

VANDAL RESISTANT

24

For AC/DC

44

+ −

+

12VDC Power Supply

~ ~

+

+

N.C.1

2 3 4 5 6 7 8 9 0 1 #

Electric Lock 1 (Fail-Safe)

+

COM 1

Varistor

For DC use only

N.O.1

(MUST install a Varistor)

PB1

Exit Button 1

PB2

Exit Button 2

152

REED

Door Closed=N.O. Door Opened=N.C.

REED

+

N.C.2

Electric Lock 2 (Fail-Secure)

▲

Diode

COM 2 Stand Alone Reader

(MUST install a Diode)

N.O.2

+

12VDC Power Supply

GND

+

RED

PINK COM. 1 YELLOW PB2

PURPLE COM.2

-

WHITE

N.O.1

BROWN REED BLUE

N.O.2

BLACK

LIGHT GREEN N.C.1 ORANGE PB1

GREY

N.C.2

GREEN GND

ACCESS CONTROL Setting the Standard in Access Control 10

All dimensions in mm | Setting the Standard in Access Control ACCESS CONTROL

All dimensions in mm

ACCESS CONTROL

E3AK7 + Keypad and Bluetooth • Operating voltage 12~24Vdc • Diecast metal • Bluetooth

• Backlit keypad • Vandal resistant • Built in tamper alarm and buzzer (85dB) • Weather resistant: IP65 • 2 LED displays with audible indication

WEATHER RESISTANT − IP 65 −

VANDAL RESISTANT

BLUETOOTH

22

76

2 3 1 5 6 4 8 9 7 0 #

Reset Procedures 1. Power o Access Control Keypad.

120

2. Move the pin Jumper to P2 and P3, then power on. 3. Hear a long beep to complete resetting procedures. 4. Move the Pin jumper back to P1 and P2 to Normal setting. 5. Login as Admin and check all users, audit trail events are all cleared and everthing is reset to factory default settings, except device name.

LED STATUS BLUE POWER ON, STANDBY MODE

AUDIBLE BEEPS

STATUS

1 SHORT BEEP KEY PRESS 1 LONG BEEP VALID ACCESS, RESET IS COMPLETE 2 SHORT BEEPS LOCKING COMPLETE 3 SHORT BEEPS INVALID ACCESS CONSTANT BEEPING BLUETOOTH DEVICE VANDALISED DOOR SENSOR IS ON

GREEN UNLOCKED, DOOR ALWAYS UNLOCKED RED INVALID ACCESS, DOOR ALWAYS LOCKED

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

11

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

DG800 + Combined Proximity and Keypad Access

• Operating voltage 12Vdc • Die-cast Aluminium • Bluetooth • Backlit keypad • Weather resistant: IP65 • Vandal resistant • Multiple LED display with audible indication

WEATHER RESISTANT − IP 65 −

VANDAL RESISTANT

BLUETOOTH

79

DG800+

DG160+

(DG800+ & DG160+ have same wiring and pin setting)

120

LED STATUS BLUE POWER ON, STANDBY MODE

AUDIBLE BEEPS

STATUS

1 SHORT BEEP KEY PRESS 1 LONG BEEP VALID ACCESS, RESET IS COMPLETE 2 SHORT BEEPS LOCKING COMPLETE 3 SHORT BEEPS INVALID ACCESS CONSTANT BEEPING BLUETOOTH DEVICE VANDALISED DOOR SENSOR IS ON

GREEN UNLOCKED, DOOR ALWAYS UNLOCKED RED INVALID ACCESS, DOOR ALWAYS LOCKED

21

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

12

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

DG-850-TH-G Standalone Keypad Access

• Operating voltage 12Vdc • Die-cast Metal • Allows up to 20+1 PIN codes • Touch Panel keypad • Dual relays output for multi-control • Weather resistant • 4 or 5 Digit Codes • 3 LED displays with audible indication

WEATHER RESISTANT IP 65

VANDAL RESISTANT

SPECIFICATION • Current draw: Average 70mA, Peak 90mA@12VDC. • Input: 1 x Request-to-exit, time out reed switch contact • Output: Dual relays, N.O./N.C/Com. Output (volt free contact). • Relays Rating: 2A MAX@30VDC., 0.4A@120VAC. • Fully programmable via keypad and master code.

+

Power Supply

INPUT 12~24VDC N.O.1 COM. 1 N.C.1

Electric Lock 1 Fail-Safe Mode

(Must install a Varistor)

+

PB PB

Dry Contact

+ +

Power Supply

• Factory master code: 12345 -1234. • Memory Volume: 20+1 PIN codes. Relay 1 is controlled by *01~*20 user slots. Relay 2 is controlled by *21 user slots.

N.O.2 COM.2

N.C.2 REED REED

Electric Lock 2 Fail-Safe Mode

• Invalid PIN Lock-out: The system will shut down for 60 seconds while 30 codes of incorrectly Master Codes enrolled or Pin codes attempted ( None beeper signal of keypad activations).

(Must install a Diode)

4 or 5 Reset

N.C Contact Output: Open Status N.O. Contact Output: Closed Status

2 15/16” (76mm)

13/16” (21mm)

For AC/DC

For DC use only

The door strike or relay must have a Varistor or a Diode across the door strike terminals to suppress the back EMF of the strike-failure to do so will damage the relay contacts and electronic components, or even burns the controller.

4 3/4” (120mm)

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

13

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL ACCESS CONTROL ACCESS CONTROL

DG -365-PLUS Proximity Access DG -365-PLUS Proximity Access

• Operating voltage 12Vdc • Die-cast Metal • Bluetooth • Weather resistant: IP65 • Vandal resistant • Multiple LED display with audible indication • Operating voltage 12Vdc • Die-cast Metal • Bluetooth • Weather resistant: IP65 • Vandal resistant • Multiple LED display with audible indication

WEATHER RESISTANT − IP 65 −

WEATHER RESISTANT − IP 65 −

VANDAL RESISTANT

VANDAL RESISTANT

BLUETOOTH

BLUETOOTH

3” (76mm)

3” (76mm)

Red (+)

Red (+)

+

+

Item 1 2 3 4 5 6 7 8 9

Item 1 2 3 4 5 6 7 8 9

Wire Color Terminal

Wire Color Terminal

Description

Description

Power Supply

Power Supply

12VDC

12VDC

Black (-) Yellow (N.C.)

Black (-) Yellow (N.C.)

-

-

Red Black Blue White Yellow Green Green

Red Black Blue White Yellow Green Green

+ - N.O. COM N.C. PB

+ - N.O. COM N.C. PB

Positive Negative

Positive Negative

+

+

Electric Lock1

Electric Lock1

Diode

Diode

Fail-Safe

Fail-Safe

White (COM)

White (COM)

-

-

(Must install diode) Diode

(Must install diode) Diode

SSR contact

SSR contact

+

+

Blue (N.O.)

Blue (N.O.)

Electric Lock 2 Fail-Secure Fail-Secure

Electric Lock 2

-

-

Green (P.B.)

Green (P.B.)

(Must install diode)

(Must install diode)

RTE contact

RTE contact

120mm 4 3/4” 4 3/4”

PB DS

PB DS

Green (P.B.)

Green (P.B.)

RTE (Dry contacts)

RTE (Dry contacts)

Orange Orange

Orange Orange

Orange (DS) Orange (DS)

Orange (DS) Orange (DS)

120mm

Door sensor (REED)

Door sensor (REED)

LED Indicator

LED Indicator

Door Sensor (REED)

Door Sensor (REED)

DS ALM ALM

DS ALM ALM

10 11

10 11

Brown (ALARM) Brown (ALARM)

Brown (ALARM) Brown (ALARM)

Brown Brown

Brown Brown

Tamper alarm output contact

Tamper alarm output contact

Tamper Alarm Output (Dry contacts)

Tamper Alarm Output (Dry contacts)

Logo Indicator

Logo Indicator

21mm 13/16”

21mm 13/16”

All dimensions in mm

All dimensions in mm

Setting the Standard in Access Control Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

ACCESS CONTROL

14

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL ACCESS CONTROL

ACCESS CONTROL

• • Operating voltage 12Vdc • Black ABS plastic • Bluetooth • Internal or external use • Self-contained • EASIPROX + Standalone Proximity • Operating voltage 12Vdc • Black ABS plastic • Bluetooth • Internal or external use • Self-contained EASIPROX + Standalone Proximity

• Read range 5cm • Fully programmable via master card • 3 LED displays with audible indication • Weather resistant: IP67 • Read range 5cm • Fully programmable via master card • 3 LED displays with audible indication • Weather resistant: IP67

WEATHER RESISTANT − IP 67 −

BLUETOOTH

WEATHER RESISTANT − IP 67 −

BLUETOOTH

18

18

80

80

114

114

LED POWER + DC12-15V BLUE POWER ON, STANDBY MODE LED POWER + DC12-15V BLUE POWER ON, STANDBY MODE

AUDIBLE BEEPS STATUS 1 LONG BEEP VALID ACCESS, RESET IS COMPLETE 2 SHORT BEEPS LOCKING COMPLETE 3 SHORT BEEPS INVALID ACCESS CONSTANT BEEPING BLUETOOTH DEVICE VANDALISED DOOR SENSOR IS ON AUDIBLE BEEPS STATUS 1 LONG BEEP VALID ACCESS, RESET IS COMPLETE 2 SHORT BEEPS LOCKING COMPLETE 3 SHORT BEEPS INVALID ACCESS CONSTANT BEEPING BLUETOOTH DEVICE VANDALISED DOOR SENSOR IS ON

GREEN UNLOCKED, DOOR ALWAYS UNLOCKED RED INVALID ACCESS DOOR ALWAYS LOCKED GREEN UNLOCKED, DOOR ALWAYS UNLOCKED RED INVALID ACCESS DOOR ALWAYS LOCKED

All dimensions in mm

Setting the Standard in Access Control Setting the Standard in Access Control

ACCESS CONTROL

All dimensions in mm

ACCESS CONTROL

15

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

SPLIT II Standalone Proximity

• Operating voltage 12 or 24Vac/Vdc • 2000 users relay 1 • 100 users relay 2 • Infra-red programmer • Reads EM, Mifare and HID cards • IMPORTANT: Cards for relay 1 do not work on relay 2

INFRA-RED

Select the lock according to the need.

Alarm

+ –

Magnetic Lock or Fail-Safe Lock Select the lock according to the need.

J1

+ –

NC1 COM1

ALARM + ALARM –

1 2

4 3

IR

LED

GND NO1

1N4004 1N4004 1N4004 1N4004

+ – Gate/Door Operator or Fail-Secure Lock Magnetic Lock or Fail-Safe Lock + –

+ 12v GND Power + – Power + 12v GND

Alarm

Lock 1

+ 12v ALARM + ALARM – GND

J2 J1

NC2 COM2 NC1 COM1 GND NO1 NC2 COM2 NO2 OPEN1 GND OPEN2 GND NO2 OPEN1 GND OPEN2 GND D_IN

1 2 1 2

4 3 4 3

IR

LED

Power Alarm

Red Black

+ – Gate/Door Operator or Fail-Secure Lock

Lock 2 Exit Lock 1 Lock 2 Exit

D0 D1 LED1 BEEP1 LED2 BEEP2 + 12v GND D0 D1 LED1 BEEP1 LED2 BEEP2 + 12v GND D0 D1 LED2 BEEP2 + 12v GND D0 D1 LED2 BEEP2

J2

Sboard-II

Exit Button of Zone 1 Exit Button of Zone 2 Exit Button of Zone 1 Exit Button of Zone 2 Door Status Detecting

Green White Brown Yellow Red Black Green White Brown Yellow Green White Brown Yellow Red Black Green White Brown Yellow Red Black

1 2

4 3

Power Alarm

Sboard-II

Reader

Reader 1

Door

Contact

GND D_IN

Reader

Door Status Detecting

Reader 1

Door

Attention: Install a 1N4004 or equivalent diode is needed when using a common power supply, or the controller might be damaged. (1N4004 is included in the packaging). Attention: Install a 1N4004 or equivalent diode is needed when using a common power supply, or the controller might be damaged. (1N4004 is included in the packaging). Contact

Reader 2

Reader 2

WHEN USING NO/NC/COM DRY CONTACT OUTPUT

J1

NC1 COM1

ALARM + ALARM –

1 2

4 3

PRODUCT

DESCRIPTION

LED

IR

GND NO1

Lock 1

+ 12v ALARM + ALARM – GND

J2 J1

NC2 COM2 NC1 COM1 GND NO1 NC2 COM2 NO2 OPEN1 GND OPEN2 GND NO2 OPEN1 GND OPEN2 GND D_IN

Split Controller with Mullion Reader

SPLIT II-M

1 2

4 3 4 3

1. Remove the Pin Caps on points 1, 2, 3 and 4 (Remark: J1 (Relay 1) & J@ (Relay2), please check the relay you are using). 2. Insert one of the Pin Caps on point 1 and point 4. 3. Fix the back cover and keep the other Pin Cap well. 1. Remove the Pin Caps on points 1, 2, 3 and 4 (Remark: J1 (Relay 1) & J@ (Relay2), please check the relay you are using). 2. Insert one of the Pin Caps on point 1 and point 4. 3. Fix the back cover and keep the other Pin Cap well.

Sboard-II 1 2 IR LED Sboard-II 1 2

Power Alarm Reader Power Alarm Reader

Lock 2 Exit Lock 1 Lock 2 Exit

Split Controller with 2 x Mullion Reader

SPLIT II-M-2

D0 D1 LED1 BEEP1 LED2 BEEP2 + 12v GND D0 D1 LED1 BEEP1 LED2 BEEP2

J2

4 3

Split Controller with wall Reader

SPLIT II-W

Controller Only

SBOARD II

Door

Mullion Multi-Tech Reader

MR-900

Contact

GND D_IN

Wall Mount EM Reader

EM-901

Door

Contact

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

16

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

EPX-10 Standalone Proximity • Operating voltage 12Vdc • ABS plastic • Allows up to 2000 users • Weather resistant: IP67 • Infrared programmer

WEATHER RESISTANT − IP 65 −

75

Red

+

Power Supply

Black

Brown

115

Unlocking Button

Orange

RED POWER + DC12-15V

Yellow

BLACK

POWER GND

BROWN UNLOCKING BUTTON

Green

ORANGE

N.C.

Grey

YELLOW

COM.

GREEN

N.O.

White

21

GRAY

485+

WHITE

485−

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

17

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

EPX10-HP Infrared Programmer

• Operating voltage : 2 x AAA Batteries • For Programming EPX Readers

All dimensions in mm

Setting the Standard

ACCESS CONTROL

18

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

One K1 Single Door Access Kit

One Door, One Box, One Solution!

KIT CONTENTS

1 x DG-15LD digital keypad, 21 users 1 x 12Vdc, 1Amp boxed power supply 1 x M1 lock, fail-secure electric release

1 x DRB001N-PTE exit button 1 x CP21-N break-glass unit

Setting the Standard in Access Control All dimensions in mm

ACCESS CONTROL

19

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

One K2 Single Door Access Kit

One Door, One Box, One Solution!

KIT CONTENTS

1 x DG-15LD digital keypad, 21 users 1 x 12Vdc, 1Amp boxed power supply 1 x U10001 magnetic lock 1 x U300ZL Z&L bracket

1 x DRB001N-PTE exit button 1 x CP21-N break-glass unit

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

20

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

One K3 Single Door Access Kit

One Door, One Box, One Solution!

KIT CONTENTS

1 x EPX10 proximity system, 2000 users

1 x 12Vdc, 1Amp boxed power supply 1 x M1 lock, fail-secure electric release

1 x DRB001N-PTE exit button 1 x CP21-N break-glass unit 10 x KT10BC tokens 1 x EPX10-HP

RED POWER + DC12-15V

BLACK

POWER GND

75

BROWN UNLOCKING BUTTON

ORANGE

N.C.

YELLOW

COM.

GREEN

N.O.

Red

+

Power Supply

115

Black

Brown White

Exit Button

1 2 3

Call Point

Orange

Yellow

Varistor

Green

21

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

21

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

One K4 Single Door Access Kit

One Door, One Box, One Solution!

KIT CONTENTS

1 x EPX10 proximity system, 2000 users 1 x 12Vdc, 1Amp boxed power supply 1 x U10001 magnetic lock 1 x U300ZL Z&L bracket

1 x DRB001N-PTE exit button 1 x CP21-N break-glass unit 10 x KT10BC tokens 1 x EPX10-HP

RED POWER + DC12-15V

BLACK

POWER GND

75

BROWN UNLOCKING BUTTON

ORANGE

N.C.

YELLOW

COM.

GREEN

N.O.

Red

+

Power Supply

115

Black

Brown White

COM

2 Way

Exit Button

1 2 3

Call Point

Orange

Yellow

Varistor

Green

21

+

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

22

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

One K5 Single Door Access Kit DG160 N-BLK Combined Proximity and Keypad Access One Door, One Box, One Solution! 1 x DG1 6 0 digital keypad, 1000 users 1 x 12Vdc, 2Amp boxed power supply 1 x M1 lock, fail-secure electric release 1 x • Operating voltage 12Vdc • Aluminium • Allows up to 1000+10 proximity cards, tokens and PIN’s • Blue Backlit keypad • Built in anti-tamper switch • 2 LED displays DRB001N-PTE exit button 1 x CP21-N break-glass unit KIT CONTENTS

WATERPROOF

VANDAL RESISTANT

− IP 6 6 −

6.7

24

For AC/DC

44

Red Black

Rechargeable Battery

44

+ −

+

12VDC Power Supply

+

+

DC OUT

Battery

Black + Brown = Reed

~ ~

+

Door Closed = N.O. Door Open = N.C.

+

N.C.1

2 3 4 5 6 7 8 9 0 1 #

16VAC IN Electric Lock 1 (Fail-Safe)

+

+

12VDC IN

White COM 1

Power Supply

Varistor

C1 C2 GND LOCK1 12VDC1 REX1 GND LOCK2 12VDC2 REX2

2 3 4 5 6 7 8 9 0 1

For DC use only

N.O.1

Brown

(MUST install a Varistor)

PB1

Exit Button 1

1 2 3

Stand Alone Reader

Call Point

PB2

Exit Button 2

152

Varistor

REED

Door Closed=N.O. Door Opened=N.C.

REED

150

+

N.C.2

COM

2 Way

Electric Lock 2 (Fail-Secure)

▲

Diode

COM 2 Stand Alone Reader

(MUST install a Diode)

Exit Button

N.O.2

+

12VDC Power Supply

GND

#

+

For AC/DC

For DC use only

+

RED

PINK COM. 1 YELLOW PB2

PURPLE COM.2

~ ~

-

+

WHITE

N.O.1

BROWN REED BLUE

N.O.2

BLACK

LIGHT GREEN N.C.1 ORANGE PB1

GREY

N.C.2

GREEN GND

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

23

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

One K6 Single Door Access Kit

One Door, One Box, One Solution!

KIT CONTENTS

1 x DG1 6 0 digital keypad, 1000 users 1 x 12Vdc, 2Amp boxed power supply

1 x U10001 magnetic lock 1 x U300ZL Z&L Bracket 1 x DRB001N-PTE exit button 1 x CP21-N break-glass unit

24

For AC/DC

44

+ −

+

12VDC Power Supply

~ ~

+

+

N.C.1

2 3 4 5 6 7 8 9 0 1 #

Electric Lock 1 (Fail-Safe)

+

COM 1

Varistor

For DC use only

N.O.1

(MUST install a Varistor)

PB1

Exit Button 1

PB2

Exit Button 2

152

REED

Door Closed=N.O. Door Opened=N.C.

REED

+

N.C.2

Electric Lock 2 (Fail-Secure)

▲

Diode

COM 2 Stand Alone Reader

(MUST install a Diode)

N.O.2

+

12VDC Power Supply

GND

+

RED

PINK COM. 1 YELLOW PB2

PURPLE COM.2

-

WHITE

N.O.1

BROWN REED BLUE

N.O.2

BLACK

LIGHT GREEN N.C.1 ORANGE PB1

GREY

N.C.2

GREEN GND

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

24

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

One K7 Access Control Kits

DG 800N Combined Proximity and Keypad Access

One Door, One Box, One Solution!

KIT CONTENTS

1 x DG800 proximity system, 2000 users • Operating voltage 12~24Vac/Vdc • Die-cast Aluminium • 1000+10 Proximity cards, tokens and PIN’s • Backlit keypad • Weather resistant: IP65 • Vandal resistant • Terminal connections • 2 LED displays with audible indication 1 x 12Vdc, 1Amp boxed power supply 1 x M1 lock, fail-secure electric release 1 x DRB001N-PTE exit button 1 x CP21-N break-glass unit 10 x KT10BC tokens

WEATHER RESISTANT − IP 65 −

VANDAL RESISTANT

OPTIONS

STD-PC

STD-PCPS

KT-10BC

KT-15EM

KT-16

621-11

For AC/DC

21

For AC/DC

+ RED − BLACK Red Black

12/24Vdc

+

+ −

21

12VDC Power Supply

76

~ ~

12/24Vdc

+

~ ~

76

+

N.C.1

REED

Brown

+

COM 1

PB1

Grey

+

3 2 1

For DC use only

Call Point

N.O.1 WHITE Orange

PB2

For DC use only

PB1 ORANGE

Varistor +

N/O1

Green

2 3 1 5 6 4 8 9 7 0 #

PB2

2 3 1 5 6 4 8 9 7 0 #

COM1

Purple

REED

N/C1

Blue

120

N.C.2

N/O2 Stand Alone Reader

Green/White

120

COM 2

COM2

Purple/White

DG800 KEYPAD / READER N.O.2

N/C2

Blue/White

COM

Exit Button

GND

2 Way

+

PURPLE/ WHITE

RED

GREY

PB1

PURPLE COM1

COM.2

+

RED

PINK COM. 1 YELLOW PB2

PURPLE COM.2

-

BLUE/ WHITE

ORANGE PB2

BLUE

N/C1

N.C.2

BLACK

-

WHITE

N.O.1

BROWN REED BLUE

N.O.2

BLACK

GREEN/ WHITE

BROWN REED

GREEN N/O1

N/O2

LIGHT GREEN N.C.1 ORANGE PB1

GREY

N.C.2

GREEN GND

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

25

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control Setting the Standard in Access Control 43

ACCESS CONTROL

ACCESS CONTROL

One K8 Access Control Kits

DG 800N Combined Proximity and Keypad Access

One Door, One Box, One Solution!

KIT CONTENTS

1 x DG800 proximity system, 2000 users 1 x 12Vdc, 1Amp boxed power supply 1 x U10001 magnetic lock 1 x U300ZL Z&L Bracket 1 x DRB001N-PTE exit button 1 x CP21-N break-glass unit 10 x KT10BC tokens • Operating voltage 12~24Vac/Vdc • Die-cast Aluminium • 1000+10 Proximity cards, tokens and PIN’s • Backlit keypad • Weather resistant: IP65 • Vandal resistant • Terminal connections • 2 LED displays with audible indication

WEATHER RESISTANT − IP 65 −

VANDAL RESISTANT

OPTIONS

STD-PC

STD-PCPS

KT-10BC

KT-15EM

KT-16

621-11

For AC/DC

21

For AC/DC

12/24Vdc

+ RED − BLACK Red Black

21

+ −

+

12VDC Power Supply

76

~ ~

12/24Vdc

+

~ ~

76

+

REED

N.C.1 GREEN Brown

+

PB1

COM 1 PINK Grey

+

1 2 3

For DC use only

Call Point

N.O.1

PB2

Orange

For DC use only

PB1 ORANGE Green

N/O1

2 3 1 5 6 4 8 9 7 0 #

Varistor

PB2

2 3 1 5 6 4 8 9 7 0 #

COM1

Purple

+

REED

N/C1

Blue

120

N.C.2

N/O2 Stand Alone Reader

Green/White

120

COM 2

COM2

Purple/White

COM

DG800 KEYPAD / READER N.O.2

Exit Button

N/C2

Blue/White

2 Way

GND

+

PURPLE/ WHITE

RED

GREY

+ PB1 -

PURPLE COM1

COM.2

RED

PINK COM. 1 YELLOW PB2

PURPLE COM.2

-

BLUE/ WHITE

ORANGE PB2

BLUE

N/C1

N.C.2

BLACK

WHITE

N.O.1

BROWN REED BLUE

N.O.2

BLACK

GREEN/ WHITE

BROWN REED

GREEN N/O1

N/O2

LIGHT GREEN N.C.1 ORANGE PB1

GREY

N.C.2

GREEN GND

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

26

All dimensions in mm | Setting the Standard in Access Control

Setting the Standard in Access Control

43

ACCESS CONTROL

MDL-01 Mechanical Door Lock

• Zinc Alloy • Remove lock from door to change code • Code in / Code out: No • Single code storage only • For door thickness 35-65mm (13/8"-21/2") • For left or right handed doors • 2 part 8mm (5/16") spring loaded spindle • Internal or external use • Type to front and back plates only

25

32

42

1 2 3 4 5 X Y

6 7 8 9 0 Z C

142

60

40

16

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

27

ACCESS CONTROL

All dimensions in mm | Setting the Standard in Access Control

ACCESS CONTROL

Access Control Accessories, Cards, Tags and Tokens

ICS Security Solutions supply a range of cards, tags, tokens and accessories that work in conjunction with our range of access control products.

ACCESS CONTROL

EPX10-HP Infrared for use with EPX-10 and EPX-30.

STD-PC Proximity Card. Printed number. EM chipset. Access Control Accessories, Cards, Tags and Tokens

STD-PCPS Proximity card. Printed number. EM chipset. With punched slot.

ICS Security Solutions supply a range of cards, tags, tokens and accessories that work in conjunction with our range of access control products.

EPX10-HP Infrared for use with EPX-10 and EPX-30.

KT-15EM Key ring proximity tag. Printed number. EM chipset. STD-PC Proximity Card. Printed number. EM chipset.

KT-16 Printed number. EM chipset. STD-PCPS Proximity card. Printed number. EM chipset. With punched slot.

KT-16BL Printed number. EM chipset.

KT-10 R C Proximity tag. Printed number. EM chipset. KT-16 Printed number. EM chipset.

KT-10 Y C Proximity tag. Printed number. EM chipset. KT-16BL Printed number. EM chipset.

KT-10 G C Proximity tag. Printed number. EM chipset.

KT-10BC Proximity tag. Printed number. EM chipset. KT-15EM Key ring proximity tag. Printed number. EM chipset.

All dimensions in mm

Setting the Standard in Access Control

ACCESS CONTROL

ACCESS CONTROL

28

All dimensions in mm | Setting the Standard in Access Control

You're safe ordering with ICS Security Solutions? ICS are importers and manufacturers of security equipment. We have over 50 years of knowledge and experience in the industry, including

15 years of working onsite in installation environments.

It’s Easy! Contact our dedicated technical and sales team by any of the means below before 4pm, and your order will be dispatched on our next day Standard Delivery Service to be with you by 6pm. Tel: 01604 879300 Fax: 01604 859545 Email: orderline@icssecurity.co.uk

DELIVERY STANDARD Up to 6.00pm

REQUIRE DELIVERY BEFORE 6 PM, THEN WHY NOT UPGRADE TO ONE OF OUR EXPRESS SERVICES.

EXPRESS SAVER

EXPRESS TIMED

EXPRESS SATURDAY

Saturday Delivery

Pre Noon

Pre 10.30am

NOTE: All prices for packages up to 60kg.

Please call ICS for our most up to date Standard and Express delivery charges.

“Setting the Standard in Access Control”